View HD74HC592FPEL_4448841.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC592
8-bit Register/Binary Counter
REJ03D0633-0200 (Previous ADE-205-513) Rev.2.00 Mar 30, 2006
Description
The HD74HC592 consists of a parallel input, 8-bit storage register feeding an 8-bit binary counter. Both the register and the counter have individual positive edge-triggered clocks. In addition, the counter has direct load and clear functions. Expansion is easily accomplished by connecting RCO of the first stage to the count enable of the second stage, etc.
Features
* High Speed Operation: tpd (CCK to RCO) = 24 ns typ (CL = 50 pF) * High Output Current: Fanout of 10 LSTTL Loads * Wide Operating Voltage: VCC = 2 to 6 V * Low Input Current: 1 A max * Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C) * Ordering Information
Part Name HD74HC592FPEL Package Type SOP-16 pin (JEITA) Package Code (Previous Code) PRSP0016DH-B (FP-16DAV) Package Abbreviation FP Taping Abbreviation (Quantity) EL (2,000 pcs/reel)
Function Table
RCK X X CLoad L H H H X X X H H H Inputs CCLR H L H H H H H CCKEN X X X X L L H X CCK X X X X Function Register data loaded into counter Counter clear Input data A to H stored into register No change in register Count up No count No cont
RCO = QA'*QB'*QC'*QD'*QE'*QF'*QG'*QH'* (CCKEN) (QA' to QH': Output of Internal Counter)
Rev.2.00 Mar 30, 2006 page 1 of 8
HD74HC592
Pin Arrangement
B1 C2 D3 E4 F5 G6 H7 GND 8 (Top view) 16 VCC 15 A 14 C Load 13 RCK 12 CCKEN 11 CCK 10 CCLR 9 RCO
Rev.2.00 Mar 30, 2006 page 2 of 8
HD74HC592
CCKEN
Logic Diagram
CLOAD
CCLR RCK D C G H E B A F D D D D D D D D
RCK RCK RCK RCK RCK RCK RCK RCK RCK RCK RCK RCK RCK RCK RCK
CCK
Rev.2.00 Mar 30, 2006 page 3 of 8
LD
RCK
CLR
CCK
LD CLR CCK CCK
CCK
T Q T T T T T T T D D Q
LD CLR CCK CCK
D Q
LD CLR CCK CCK
D Q
LD CLR CCK CCK
D Q
LD CLR CCK CCK
D Q
LD CLR CCK CCK
D Q
LD CLR CCK CCK
D Q
LD CLR CCK CCK
RCO
HD74HC592
Absolute Maximum Ratings
Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Symbol VCC VIN, VOUT IIK, IOK IOUT ICC or IGND PT Ratings -0.5 to 7.0 -0.5 to VCC +0.5 20 25 50 500 Unit V V mA mA mA mW
Storage temperature Tstg -65 to +150 C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time.
Recommended Operating Conditions
Item Supply voltage Input / Output voltage Operating temperature Input rise / fall time Note:
*1
Symbol VCC VIN, VOUT Ta tr , tf
Ratings 2 to 6 0 to VCC -40 to 85 0 to 1000 0 to 500
Unit V V C ns
Conditions
VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V
0 to 400 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics.
Electrical Characteristics
Item Input voltage Symbol VCC (V) VIH 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 Min 1.5 3.15 4.2 -- -- -- 1.9 4.4 5.9 4.18 5.68 -- -- -- -- -- -- -- Ta = 25C Typ Max -- -- -- -- -- -- 2.0 4.5 6.0 -- -- 0.0 0.0 0.0 -- -- -- -- -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.26 0.26 0.1 4.0 Ta = -40 to+85C Unit Min Max 1.5 3.15 4.2 -- -- -- 1.9 4.4 5.9 4.13 5.63 -- -- -- -- -- -- -- -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 1.0 40 V Test Conditions
VIL
V
Output voltage
VOH
V
Vin = VIH or VIL IOH = -20 A
VOL
V
Vin = VIH or VIL
IOH = -4 mA IOH = -5.2 mA IOL = 20 A
Input current Quiescent supply current
Iin ICC
IOH = 4 mA IOH = 5.2 mA A Vin = VCC or GND A Vin = VCC or GND, Iout = 0 A
Rev.2.00 Mar 30, 2006 page 4 of 8
HD74HC592
Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Maximum clock frequency Propagation delay time Symbol VCC (V) fmax 2.0 4.5 6.0 tPLH tPHL tPLH tPHL tPLH 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 Setup time tsu 2.0 4.5 6.0 2.0 4.5 6.0 Output rise/fall time Input capacitance tTLH tTHL Cin 2.0 4.5 6.0 -- Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 80 16 14 100 20 17 100 20 17 200 40 34 -- -- -- -- Typ -- -- -- -- 24 -- -- 27 -- -- 26 -- -- 29 -- -- 8 -- -- 12 -- -- 0 -- -- 14 -- -- 5 -- 5 Max 5 25 29 200 40 34 200 40 34 200 40 34 300 60 51 -- - -- -- -- -- -- -- -- -- -- -- 75 15 13 10 Ta = -40 to +85C Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 20 17 125 25 21 125 25 21 250 50 43 -- -- -- -- Max 4 20 24 250 50 43 250 50 43 250 50 43 375 75 64 -- -- -- -- -- -- -- -- -- -- -- -- 95 19 16 10 ns ns CCKEN to CCK ns ns CCLR to RCO ns CCK to RCO Unit MHz Test Conditions
ns
C Load to RCO
tPLH tPHL Pulse width tw
ns
RCK to RCO
Removal time
trem
ns
CCLR to CCK
ns
CCK to RCK
pF
Test Circuit
VCC VCC
Input
See Function Table
CLoad RCK CCKEN CCK CCLR A to H RCO CL = 50 pF Output
Pulse Generator Zout = 50 Input Pulse Generator Zout = 50
Note : 1. CL includes probe and jig capacitance.
Rev.2.00 Mar 30, 2006 page 5 of 8
HD74HC592
Waveforms
* Waveform - 1 (CCK, RCK to RCO)
tr Input CCK RCK
90 % 50 % 50 % 10 %
tf VCC
50 % 10 % 50 %
tw(H) t PHL
90 %
tw(L) t PHL
90 % 50 % 10 %
0V
VOH VOL
Output RCO
50 % 10 %
t TLH Note : 1. Input waveform : PRR 1 MHz, duty cycle 50%, tr 6 ns, tf 6 ns
t THL
* Waveform - 2 (CLoad to RCO)
tf Input CLoad
90 % 50 % 10 % 10 %
tr
90 % 50 %
VCC 0V
tW t PLH Output RCO t TLH t PHL
90 % 90 % 50 % 10 %
VOH VOL
VOH
50 % 10 %
Output RCO
VOL
t THL Note : 1. Input waveform : PRR 1 MHz, duty cycle 50%, tr 6 ns, tf 6 ns
Rev.2.00 Mar 30, 2006 page 6 of 8
HD74HC592
* Waveform - 3 (CCLR to RCO, CCLR to CCK)
tf
90 %
tr
90 % 50 % 10 % 10 %
VCC 0V
Input CCLR
50 %
tW t rem
90 %
VCC 0V
Input CCK
50 % 10 %
tr t PLH
90 %
VOH VOL
Output RCO
50 % 10 %
t TLH Note : 1. Input waveform : PRR 1 MHz, duty cycle 50%, tr 6 ns, tf 6 ns
* Waveform - 4 (CCKEN, RCK to CCK)
tr Input CCKEN RCK
10 % 90 % 50 % 90 % 50 % 10 % 50 %
tf VCC 0V th VCC
50 % 10 % 50 %
t su
th
90 %
t su
Input CCK
50 % 10 %
0V
tr
tf
Note : 1. Input waveform : PRR 1 MHz, duty cycle 50%, tr 6 ns, tf 6 ns
* Waveform - 5 (Data to RCK)
tr Input Data
10 % 90 % 50 % 90 % 50 % 10 % 50 %
tf VCC 0V th VCC
50 % 10 %
t su
th
90 %
t su
Input RCK
50 % 10 %
0V
tr
tf
Note : 1. Input waveform : PRR 1 MHz, duty cycle 50%, tr 6 ns, tf 6 ns
Rev.2.00 Mar 30, 2006 page 7 of 8
HD74HC592
Package Dimensions
JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B Previous Code FP-16DAV MASS[Typ.] 0.24g
*1
D F 9
16
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
E
Index mark
*2
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
8 bp x M L1
Reference Symbol
c
Dimension in Millimeters
A1
y
L
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0 8 7.50 7.80 8.00 1.27 0.12 0.15 0.80 0.50 0.70 0.90 1.15
Rev.2.00 Mar 30, 2006 page 8 of 8
A
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0

▲Up To Search▲

Price & Availability of HD74HC592FPEL

	To Download HD74HC592FPEL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .